На вам цитату из хелпа (хотя и без хелпа все понятно):
Plugin Delay Compensation - PDC
PDC is required when FX plugins introduce unwanted delays between their input and output sound OR instrument plugins are slow to respond to note input (none of the FL Studio plugins require PDC, all operate in real-time).
Delay Pre/Post - Left-click this switch to change between pre delay (used for instruments/generators) and post delay (used for effects). The Pre setting delays the audio prior to entering a mixer track, Post delays the audio leaving a mixer track.
Delay entry menu (showing 'none' in the example at C, above) - This is the delay control menu, there are several units in which delays may be entered, left-click to select from:
Reset - Resets the PDC to 'none', the default 'no delay' condition.
Set in ms (milliseconds) - Set the PDC in ms, a value entry box will appear after selecting this setting.
Set in samples - Set the PDC in samples, a value entry box will appear after selecting this setting.
Set in beats - Set the PDC in beats, a value entry box will appear after selecting this setting.
Set from - This will list mixer tracks that have latency caused by plugins. Select a track to automatically adapt the current PDC value to the selected track without the need to manually enter values.
The Delay Panel (C), available on all mixer tracks, allows you to configure the mixer to use plugins that can't process audio in real-time, including compressors with 'look ahead' functions and 'Convolution Reverbs'. Without PDC, affected plugins will sound out of time with the main audio. The PDC control settings allow you to compensate for the unwanted delay so that the non-affected mixer tracks are synchronized with the delayed track. The setup is completed manually, a tutorial is provided in the next section.
Note: When using PDC, FL Studio will no longer respond 'instantly' as the audio output is delayed to sync with the slow plugin.
Короче, щелкаешь Pre или Post - перед или после микшер-трека задерживается аудио-поток; и выпадающая менюшка, в которой выбираешь единицы измерения (отменить задержку нафиг/мс/семплы/четверти) - появляется диаложек, состоящий из одного-единственного поля ввода, собственно, количественной характеристики задержки.
ЗЫ. А фича-то профессиональная. Я раньше и не замечал.
