Image Line Harmless VSTi 1.0.1

Форум раздела «Всё о FruityLoops» на MixGalaxy.ru. Обсуждаем всё, что относится к созданию музыки в программах FruityLoops и FL Studio.

Модераторы: Sibson, fat, Till Ulenspiegel, Yuri Prime, VAD, Deeman., Troshkin, Vospi, SD, Promension, Hans Pfaal, Monowood

Image Line Harmless VSTi 1.0.1

Непрочитанное сообщение rasel » 03 янв 2010, 18:33

Изображение

Harmless is an additive synthesizer doing subtractive synthesis. Or if you prefer, a subtractive synthesizer powered by an additive synthesis engine. You may ask: why? For several reasons. To begin with, there are too many subtractive synthesizers already, often bragging about being virtual analog. This one is digital, and proud to be. Everything is fake, the tone generator, th filter & its resonance, the phaser, all performed on the harmonics, before partials are computed. Now, how it’s synthesized shouldn’t matter after all, if the result sounds subtractive. But Harmless is more than a proof of concept, it allows fine control that wouldn’t be possible through classic subtractive synthesis. Filtering and phasing can be assigned unusual shapes & slopes, something normally only possible through offline digital filters. Filter slopes can even be defined in Hz instead of octaves. Finally, you get control on each partial’s frequency, creating timbres definitely impossible using common synthesis methods.


Harmless, for less harmonics
Again, Harmless is additive doing subtractive. Harmonics are not produced to be filtered, the timbre is filtered before being generated. This may sound like a detail, but generating sounds this way offers a lot more advantages than drawbacks.

Not necessarily less efficient
Powered by a highly optimized, multithreaded additive engine, CPU usage is comparable to the one of traditional subtractive synthesizers, especially for low-passed timbres. Voices may be generating hundreds of harmonics in parallel and still not overload the CPU.

Because less is more
Harmless was limited by design. We don’t have any problem with complex synthesizers (we made several), but they’re not for everyone. Here, no tabs, no hidden controls, no multipoint envelopes, all features are visible at once, and color-grouped. Over 100 parameters, most of which being automatable, are laid over a clear GUI.

Harmless, only in appearance
Simpler to program, yet packed with evil features. Under the hood, you will find unique options, like linking the phaser’s output to partials frequencies. The LFO section can act as a special modulation source, linking the phaser’s width to the velocity, or the pitch to the filter’s envelope. Of course, Harmless also offers features typically unique to additive synthesis, like its automatable harmonic mask.

Harmless is also packed with effects, the usual chorus, delay & reverb, but also a multiband compressor/limiter powered by Maximus itself. It also inherited the powerful unison from Sytrus. In conclusion, our goal was to create a subtractive synthesizer with a unique twist, that also was easy to program, and we believe it succeeded.

NOTE: Harmless is some time Harmful and some DAW cannot recall Cutoff Frequency parameter. I think Image-Line will fix soon, as always. FLi was not tested. According to the WebSite, [The VSTi version doesn't seem to unlock yet. FL version works fine ] So we’ve only cracked a VSTi version of it.





СКАЧАТЬ
rasel
Newbie Member
 
Сообщения: 13
Зарегистрирован: 25 ноя 2008

Непрочитанное сообщение Starman » 04 янв 2010, 10:06

А как это будет по-русски?
Аватара пользователя
Starman
Junior Member
 
Сообщения: 55
Зарегистрирован: 02 май 2006
Откуда: Челябинск

Непрочитанное сообщение Gipa » 13 мар 2010, 01:24

Image-Line Harmless 1.0.4

Кто-нибудь ставил на ФЛ 9.0.3.? Не могу открякать.(
УРА, товарищи!
Аватара пользователя
Gipa
Good Member
 
Сообщения: 7523
Зарегистрирован: 07 апр 2007

Непрочитанное сообщение =DRiNK= » 13 мар 2010, 01:39

у меня работает
BOOM DIGGY DIGGY DIGGY BOOM DIGGY BANG
...не братцы, на этом денег не заработаешь, пойду в офис экселевские таблицы дрочить по 40 часов в неделю.Ⓒ
Аватара пользователя
=DRiNK=
Модератор
 
Сообщения: 7567
Зарегистрирован: 20 май 2007
Откуда: Украина

Непрочитанное сообщение Gipa » 13 мар 2010, 01:44

А я её как вст и не ставил. Это плохо?
УРА, товарищи!
Аватара пользователя
Gipa
Good Member
 
Сообщения: 7523
Зарегистрирован: 07 апр 2007

Непрочитанное сообщение =DRiNK= » 13 мар 2010, 01:46

а она тебе как что нужна? :wink:

в фл? тогда ставь как вст :|
BOOM DIGGY DIGGY DIGGY BOOM DIGGY BANG
...не братцы, на этом денег не заработаешь, пойду в офис экселевские таблицы дрочить по 40 часов в неделю.Ⓒ
Аватара пользователя
=DRiNK=
Модератор
 
Сообщения: 7567
Зарегистрирован: 20 май 2007
Откуда: Украина

Непрочитанное сообщение Gipa » 13 мар 2010, 01:48

Я её поставил как фрути плагин. Работает, но остаётся демо.
УРА, товарищи!
Аватара пользователя
Gipa
Good Member
 
Сообщения: 7523
Зарегистрирован: 07 апр 2007

Непрочитанное сообщение =DRiNK= » 13 мар 2010, 01:54

вст работает, проверено

а фрути плагин хз
BOOM DIGGY DIGGY DIGGY BOOM DIGGY BANG
...не братцы, на этом денег не заработаешь, пойду в офис экселевские таблицы дрочить по 40 часов в неделю.Ⓒ
Аватара пользователя
=DRiNK=
Модератор
 
Сообщения: 7567
Зарегистрирован: 20 май 2007
Откуда: Украина

Непрочитанное сообщение Gipa » 13 мар 2010, 02:04

ВСТ крякнулся! :invent: Спасибо тебе, Дринк!
УРА, товарищи!
Аватара пользователя
Gipa
Good Member
 
Сообщения: 7523
Зарегистрирован: 07 апр 2007


Вернуться в Всё о FruityLoops и FL Studio

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 4

Наши проекты: MixGalaxy.ru | Всё о FruityLoops и FL Studio на MixGalaxy.ru | Всё о Propellerhead Reason на ReasonMusic.ru
cron